PRODUCT > 장비 > NTC

  • 제품명 : NTC PC30

  • Description :0 to 30 PSI Pneuchange Unit c/w Integrated Battery Alarm
    Extended Description :Two-inlet gas cylinder automatic changeover unit providing a continuous supply of gas whilst the exhausted cylinder is replaced. The unit is designed for use with CO2 and other inert gases supplying incubators and similar laboratory equipment. The unit provides a visual indication of active input and an audible indication of changeover.
    Max. Inlet Pressure :6.9bar (100psi)
    Min Inlet Pressure :2bar (30psi)
    Operating Pressure :0 to 2.1bar (0 to 30psi) [See also Other Technical Data]
    Inlet Connection :2 off 3/8” BSPP male coned R/H c/w 2 off hosetails to suit 6.4mm (1/4”) ID hose
    Outlet Connection :3/8” BSPP male coned R/H c/w hosetail to suit 6.4mm (1/4”) ID hose
    Mounting Style :Flush, In-line
    Wetted Materials :Brass, nickel-plated brass, steel, polyurethane, technopolymer, Cu-alloy, nylon, nitrile rubber, acetal
    Non-wetted Materials :Steel (zinc-plated, chrome-plated), stainless steel, plastic, vinyl, aluminium alloy
    Operating Temperature :0°C to 50°C (32°F to 122°F)
    Recommended Filtration :20 micron. User to provide separately (see Other Technical Data).
    Weight :2.270kg (5.00lb)
    Voltage :9Vdc (battery alarm)
    Wattage :0.072 watt
    CE Mark :Yes
    ROHS Compliant :Yes
    REACH Compliant :Yes
    ATEX Compliant :No
    WEEE Compliant :Yes (via responsible battery disposal or return to NT&CS)
    Other approvals :None
    Clean Room Manufactured :Controlled Environment
    Country of Origin :United Kingdom
    Any other Technical Data :This unit must only be used for CO2 and other inert gases. The regulator is of the relieving type and so it is recommended that suitable ventilation is provided when the unit is operating. When setting the outlet pressure, always adjust on increasing pressure. Filters are available for incorporation into the Pneuchange inlet lines (see part number CFILT). If further information on this product is required, see Downloads – Frequently Asked Questions, or contact EOX Shop +44 (0)2392 266031
    Disclaimer :All information has been carefully collated and presented, however, Eoxshop cannot accept responsibility for incorrect or misprinted information